Time is the only thing that can not be compensated or even purchased at great expense.
That is why today the whole world prefers to use ready-made tools that are available in the market
Save some time and maybe save time for yourself.
Prefabricated walls are also one of the materials used to rebuild ruins after World War II
Was used.
“Prefabricated” generally means the mass production of all or part of the structural members in a factory
Then install and integrate the components on site.
Prefabricated wall in two types of one-sided and two-sided facade using steel rods inside the body of the wall
They are reinforced and increase its resistance to storms and earthquakes
Turns; As previously mentioned, prefabricated walls are made of different types of concrete in different sizes and dimensions
Also available in various designs. From these walls as a divider between the lands, the fence of the yard and
Or used for wall painting inside a residential house.
But in this article we are going to talk about lightweight concrete components and prefabricated concrete walls that are used in yards
We can talk.
Prefabricated walls use certain materials, depending on where the wall will be installed
Each of its ingredients will be different.
In general, any prefabricated wall consists of:
Cement: Cement used must be prepared according to national standards, which is usually type 1 or type 2 cement
Is used.
Water: Drinking water should be clean and clean and as free as possible from organic, alkaline and acidic substances, ie water
Do not use drinking; Because they are harmful for making mortar.
Rebar: The rebar used must also have certain standards, which are usually made of A3 rebar with resistance
High tension is used.
Aggregate: Aggregate compositions should be in accordance with principles that do not violate the standards of prefabricated walls. Usually
Consumable aggregates contain sand, lentil sand and pea sand.
Additives: The wall surface must be smooth and polished, so use high quality lubricants
May be.
Specifications and features of prefabricated walls
Prefabricated walls in standard mode have a number of features common to panels, columns and foundations
Which include:
Panel Features
Height 123 cm
Length 392 cm
Thickness 12 cm
Column Features
Height 285 cm
20 cm Dimensions -30
Basic features
From a height of 50 cm
75 cm Dimensions -90
These walls also have general features:
High flexural strength of MPa7
Water absorption less than 4%
Resistance to acid rain
No shrinkage
Tensile strength above MPa 4
Compressive strength above 30 MPa
are.
Advantages of prefabricated walls
Ability to produce custom with the desired design and dimensions
High wall quality and quality control in all stages
No need to show off and paint
Ability to install in special weather conditions
Possibility to hack the logo even on both sides of the wall
High installation speed
Easy shipping
Low maintenance costs
Can be installed on sloping surfaces
Two sides of the facade, which reduces the cost of facade construction.
Ability to reduce wall thickness
